Unlike a conventional first-time thread repair, the BIG-SERT system removes the damaged area surrounding the previous repair and installs a larger outside-diameter solid steel insert while restoring the internal thread to the original M10 x 1.25 size.

What Makes the 5012C Different?

The 5012C includes a tap guide, providing additional alignment assistance while cutting the new oversized threads. This can be particularly valuable where keeping the repaired thread square and properly aligned with the original hole is important.

The kit is supplied with the tooling necessary to prepare the damaged hole and install the BIG-SERT insert:

• Drill
• Counterbore
• BIG-SERT tap
• Insert driver
• Tap guide
• Five (5) steel BIG-SERT inserts – P/N 50123
• Thread locking/sealing compound

The supplied inserts are 20 mm long.

Important Hole-Depth Requirement

Before purchasing the 5012C, measure the available hole depth.

A blind hole must be at least:

26 mm (1.023″) deep

for the 20 mm inserts supplied with this kit.

If the blind hole does not meet this requirement, do not use the 5012C, because its inserts are too long. For shallower applications, the 5012B, supplied with 14 mm inserts, is the appropriate alternative.

Maximum Existing Hole Size

The condition of the failed repair also matters. The damaged hole should not be larger than 31/64″ (0.484″) before performing the 5012C repair.

This is an important qualification when dealing with a badly damaged hole or failed previous insert. BIG-SERT requires sufficient surrounding parent material for the new oversized threads to be properly formed.

The post Time-Sert 5012C M10 x 1.25 Metric Thread Repair Kit first appeared on Mechanics Tools & Bits.

Stainless Steel Metric Insert Size M8x1.25

 Insert Length Metric is 16.2

 Professional Thread Repair

 TIME-SERT thread repair system the ultimate way to repair threads in stripped or damaged holes

Time Sert inserts self locking. On installation the bottom internal threads of the insert are cold rolled to expand the mating external threads into the base material locking the insert in place.

Inserts are sold in 10 packs.

The post Time-Sert 18124 M8 x 1.25 x 16.2mm Metric Stainless Steel Insert first appeared on Mechanics Tools & Bits.

The post Time-Sert 38156 M18 Drain Plug Seat Reconditioner first appeared on Mechanics Tools & Bits.

 Insert Length inches is .350

 Professional Thread Repair

 TIME-SERT thread repair system the ultimate way to repair threads in stripped or damaged holes

Inserts are sold in 10 packs.

The post Time-Sert 05617 5/16-18 x .350 Inch Stainless Steel Insert first appeared on Mechanics Tools & Bits.

The hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely. This effective method has been used since 1908. They are available in every tap size, both inch and metric, as handy sets or individual pieces. Tap Extractors will fit both NC and NF taps.

The post Walton 30053 #5 STI 3-Flute Tap Extractor first appeared on Mechanics Tools & Bits.

10 Inserts

Inserts are sold in 10 packs.

This is an Image of how you measure and tell if it is Washer or Taper Seat

The post Time-Sert 40105 M10 x 1.0 x 23.0 Spark Plug Inserts first appeared on Mechanics Tools & Bits.

Sold in package of two (2) sleeves

The post Time-Sert EN-42385-67 M10 x 1.5 GM Starter Sleeve first appeared on Mechanics Tools & Bits.

M6x1.0 Carbon Steel Insert 15.0 Part #161031

 Insert Length Metric is 15.0

 Professional Thread Repair

Time Sert inserts self locking. On installation the bottom internal threads of the insert are cold rolled to expand the mating external threads into the base material locking the insert in place.

Inserts are sold in 10 packs.

The post Time-Sert 161031 M6 x 1.0 x 15.0mm Metric Steel Insert first appeared on Mechanics Tools & Bits.

M10x1.5 Carbon Steel Insert 30.0 Part #10159

 Insert Length Metric is 30.0

CAN ONLY BE INSTALLED USING THE TIME-SERT 7580 THREAD REPAIR KIT.

 Professional Thread Repair

 TIME-SERT thread repair system the ultimate way to repair threads in stripped or damaged holes

Inserts are sold in 10 packs.

The post Time-Sert 10159 M10 x 1.5 x 30.0mm Metric Carbon Steel Insert first appeared on Mechanics Tools & Bits.

The hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely. This effective method has been used since 1908. They are available in every tap size, both inch and metric, as handy sets or individual pieces. Tap Extractors will fit both NC and NF taps.

The post Walton 30624 5/8″ STI 4-Flute Tap Extractor first appeared on Mechanics Tools & Bits.